Custom Sponsor Nameset Sticker

Custom Sponsor Nameset Sticker

Instruction (Using Heat Transfer Machine):

• 1) Place the glue side (rough side) of the patch down on the shirt in correct position.

• 2) Temperature: 150 degrees C

• 3) Cover with material, make sure not to move the patch, such as cotton handkerchief or tissue paper.

• 4) Time: 15 seconds

• 5) Pressure: Very firm
• 6) Peel: Cool (allow to cool for at least 60 seconds before carefully peeling the backing material).
• 7) If the patch does not fully stick, recover and press for a further 5 seconds.
• 8) Do not wash shirt for 48 hours after application